HOW TO FIX A PUNCTURED TIRE – 3 EASIEST WAYS

When driving on the road, one must be prepared for tire punctures. No matter how much care is exercised, a puncture can happen anywhere and at any time. However, there is no need to worry. You can replace the tire with a spare. If you do not own a spare tire, call a vehicle recovery service. Please note that Any Car Towing also provides car recovery services in Melbourne. Afterward, you can get the tire repaired from the nearest workshop.

Unfortunately, not all punctured tires can be repaired. There are many instances in which the only option left is to opt for new tires. Let us look at when a tire is beyond repair.

TIRES THAT ARE BEYOND REPAIR

  • The tread depth has fallen below the legal limit of 1.6 mm. Tires below this limit are unsafe for driving. Also, in countries like Australia, if you are caught driving with such tires, be prepared to pay a hefty fine.
  • If the rubber is cracked or worn out, the workshop will refuse to carry out the repair. The main component of the tire is rubber. Therefore, if the main component is damaged, there is no point in carrying out the repairs.
  • The puncture’s size is equal or more than 6 mm in diameter. Such a puncture has ruptured the vital components, leaving out chances of a successful repair.
  • The sidewall is damaged instead of the tread. Punctures in the sidewall cannot be repaired. A puncture in the sidewall compromises the structural integrity of the whole tire.
  • If the cords are visible as a result of the puncture, opt for a new tire.
  • A tire that has been repaired numerous times would not be able to stand more damage. Even a minor puncture can make it beyond repair.

Tire Repair

On the other hand, if the tire does not meet the above criteria, it can be repaired with little trouble. Speaking of tire repair, let’s take a look at the different types of punctures used by workshops during the repair process.

Plugging

This is the easiest and quickest way of fixing a puncture. It does not even require the removal of the tire. During plugging, a piece of leather is covered with a rubber adhesive. When you start driving around, heat is generated which turns the leather into a hard substance that sticks onto the tire. There is no way of removing the leather as it becomes ingrained with the rest of the tire and acts as a permanent seal.

Patching

When the puncture is too wide or deep, plugging cannot be used. This is where patching comes into play. Patching requires the removal of the tire. Afterwards, a rubber patch is applied to the inside of the tire. The patch is a square rubber adhesive similar to the one used in plugging. However, the difference is that it is much bigger and applied to the inside. When the car starts moving, tires start to heat up. This causes the adhesive to become hardened and prevent leakage of air.

Hybrid

Some punctures are so complex that they require the application of a hybrid seal. In simple words, a hybrid is a combination of plugging and patching. This method is quite time-consuming but also the most effective. In it, a rubber patch is placed inside of the tire and then threaded through the puncture to prevent any leaks.

Now Any Car Towing is available in Lynbrook Victoria 3975, Australia.

Contact Us

Any Car Towing

10 Silvergum Pl, Cranbourne VIC 3977

(03) 7036 5450

www.anycartowing.com.au



source https://anycartowing.com.au/how-to-fix-a-punctured-tire-3-easiest-ways/

Comments

Popular posts from this blog

When You Need to Make an Emergency Stop on the Highway

Top Ways To Prevent Accidents On The Road

WHICH TYRE IS BETTER – COMPARISON OF MRF AND CEAT